To accompany you and facilitate your DIY, use the appropriate drill adapted to your work. Start by identifying the projects you will need to do, they will guide you on the drill to choose. Here are 10 tips to help you make the right choice.
The screwdriver-unscrewer drill
For jobs such as fixing a frame or a wall shelf as well as small DIY jobs, a screwdriver-unscrewer will be very useful to you.
The cordless drill
With easy to perform jobs, a cordless drill is quite handy for good handling. It is transportable everywhere in the room and even in the garden as well as on the terrace. Small jobs on soft materials such as plaster and wood as well as brick are suitable for him. It is equipped with a battery which allows it to be autonomous.
corded drill
If your work is on harder substrates such as concrete or tiles, you need more power, so a corded drill is more suitable, it will remain connected to the mains.
The hammer drill
It is mainly intended for hard materials such as concrete or tiles. It has better drilling capacity.
The drill with power
With or without wire, you will have to take into account its power. Choose a drill from 600W to be able to perform different jobs and not just stop at drilling and screwing.
The lightweight drill
The weight of a drill should also be considered when purchasing. Doing work at height with a drill that is too heavy will not make your job easier.
The drill press
If your jobs require serial and precise drilling, the drill press is a good fit. It is installed in a workshop and does not require a large location depending on the type of drill press you choose.
The battery drill
Pay special attention to the battery life of your drill. It should allow you to do the job comfortably so that you don’t have to recharge it every hour, which will delay you in your work. Opt for lithium-type batteries, they have the ability to charge quickly and they are lightweight. Some drills come with two batteries, which is quite a nice feature because you’ll have one battery to spare while the other charges.
The magnetic drill
It is very practical for precise work thanks to its magnetic characteristic. Milling and drilling will be carried out with precision.
The drill and its tools
A wick or a drill are essential: the choice between the two will depend on your needs. For all your drilling on wood and for work on concrete and tiles, opt for the drill bit, while for metal, the drill bit is suitable. Drill bits and bits come in different diameters, and if you’re using a dowel on hard substrates like concrete, the diameter should be equal to the dowel. On the other hand, if you tinker on soft materials such as plaster, the drilling must be 5 mm less than the diameter of the dowel.