Bathtub cladding: 8 practical and decorative ideas

If, as in the most common case, your bathtub does not sit in the middle of your bathroom, it needs a covering, if only to hide all the piping, but also to play the decoration and design card . An apron is the easiest way to dress up your tub. You match it to the rest, put it down easily and you’re done. But this elegant dressing is not always possible. Here are some alternatives regarding the possible coating of your bathtub.

The simplest dressing: an apron for your bathtub

An apron is certainly the simplest and most elegant solution to dress up a bathtub, whether corner or wall-mounted. What’s so good about opting for an apron? In fact, everything. The apron is easy to assemble, just clip it on and you’re done. It can also be quickly removed for possible repairs. There is therefore no need for a special opening to be provided. A bath apron takes up little space and comes in different colours. You can have fun, if it’s the design and decoration map you’re looking to play.

For a made-to-measure covering: a foam apron

Hard foam panels are a very simple option for lining your bathtub. You can then tile them directly as you see fit. For assembly, the construction panels are provided with a special adhesive and sealant for the upper edge. An inspection opening can be easily cut at the desired location. Rounding can also be achieved by means of incisions on the plate. Compared to the apron, however, the options are very limited. Nonetheless, hard foam panels are an easy-to-implement option for lining your bathtub. Many systems are specifically designed for DIYers. They allow you to dress the bathtub as you wish: truly made-to-measure! The tile is certainly the first choice for the coating of the bathtub. It is a product available in a wide variety of sizes and models. It has the advantage of also being ultra-resistant to humidity.

When building your bathtub: a concrete surround

Concrete is the right choice for those looking for a stable stone coating. Flat concrete building panels can be cut fairly easily with a conventional saw and can also be tiled directly. The plates are connected to each other with a cement in a thin or normal layer. Thin layer cement or concrete adhesive have the advantage of allowing tighter joints. To guard against any possible breakdown or leak, you must provide an inspection opening at the front of the bath. Install an inspection door there.

As in the hammams: a bathtub covering in tadelakt

You have probably seen this material in hammams. You thought it was synthetic? In fact it is a coating – known since Antiquity. It is handcrafted. It is a material that is sensitive to shocks and scratches, but can still be suitable for covering your bathtub. If you are looking for the elegant, the authentic and the unusual: this is the choice you have to make!

A bathtub cladding you don’t think of: wood

Wood gives your bathroom a very warm character. It is with relative ease that it can be used for the coating of your bathtub. However, there are a few points to consider: Direct contact with water should be avoided, at least for a long time. Even short-term water spray or increased humidity does not affect the wood. However, proper installation and professional sealing are important.

natural stone

When it comes to bathtub cladding, stone is a must. This natural material impresses with its individual grain and long life. For the cladding you can use polished natural stone tiles or untreated natural stone, if you want it a little wilder. Types of natural stone are, for example, travertine, marble, slate or granite.

Aluminum composite panels

The aluminum composite panels allow a uniform and waterproof coating of the bathtubs. They are available in a wide variety of designs – for example in stone, wood or metal semblances. They can be cut to size and then glued to the bathtub. The plates are relatively easy to maintain. So it’s ideal if you want something simple.

An apron but not only to dress your bathtub

The faucets

And if to dress your bathtub, you turned to the side of the faucets? Perhaps simply changing your shower head would bring you comfort and satisfaction? You just have to unscrew the old one then install the new one. Like what, it is not enough to give a boost to your bathtub.


To dress up your bathtub, buy a nice bathroom light or two. Consider choosing those with dimmers to give you the ability to dim the light. This new equipment can make life in your bathroom brighter and friendlier. Likewise, don’t wait for special occasions to light candles.

The curtain

Treat yourself to a new shower curtain! An inexpensive and very effective investment if you want to beautify the environment of your bathtub. Whether it’s extravagant patterns or a pretty plain colour, the choice is yours! For a harmonious decoration, match the colors of the towels and bath mats with that of your shower curtain.


The good thing: many plants like humidity and therefore love the climate of your bathroom, and especially that of the edges of your bathtub. The only requirement: light, even if it only comes through a small window.

Leave a Comment